Spindle Lock Pin & Spring (19/20) Service Kit

Extra Information

• Compatibility: Intended for the Tork Craft TCAG0115 angle grinder series.
• If the spindle lock still slips after replacement, inspect the mating lock point on the gear/spindle area for wear or damage.
• Only use the spindle lock when the grinder is fully stopped—engaging it while spinning can damage the mechanism.

Features

• Targeted spindle-lock repair: Replaces the lock pin and spring components for the TCAG0115.
• Parts reference match: Covers parts 19 and 20 as per the service diagram references.
• Restores positive engagement: Helps the spindle lock hold securely during disc and flange nut changes.
• Model-specific fit: Intended for compatibility with the Tork Craft TCAG0115 angle grinder.

Benefits

• Easier disc changes: A firm spindle lock makes loosening/tightening smoother and more controlled.
• Improved safety and confidence: Reduced chance of slipping during accessory changes when the lock engages properly.
• Extends tool usability: Refreshes a commonly worn mechanism without replacing the entire grinder.

Safety

• Wear eye, ear and dust protection when operating an angle grinder.
• Disconnect power before fitting any spare parts or attempting disc changes.
• Never press the spindle lock while the grinder is spinning or coasting to a stop.
• Confirm the guard is correctly fitted and the spindle rotates freely before use.
• After any repair, do a no-load test run in a safe area to check for normal operation.

Specifications