- Stock: In Stock
- Cat No: TCHB35T
- Weight: 0.04kg
- Dimensions: 90.00mm x 182.00mm x 182.00mm
- SKU: TCHB35T
- Barcode: 6009675085187
- Pack Size: 50
A hinge bore is required if you need to use cup shaped euro hinges for a wooden cupboard door.
How to use the Hinge bore bit:
The radius of the hinge bore is 17.5mm and it is also the centre point distance. It would be safe to have a 4-5mm shoulder from the side of the cupboard door. So the distance from the edge to start boring is 17.5+4.5=22mm.
It is critical to bore the correct depth. Most cupboard doors vary in thickness from 16-22mm. The standard depth to bore is 13mm for most euro hinges.
Sharpening:
Hardwoods require a slow speed when boring. The hinge bore can easily be
sharpened using a diamond file. Click
here to have a look at the DMT diamond products.
TIP:
Use a drill press, it is easier to control the correct depth adjustment. It is
also possible to make a jig for future hinge boring.
| consider safety for your health and the people around you | |||
General safety suggestions:It is advisable to always have the following items nearby and in a good condition
|
|||
 |
 |
 |
 |
|
Wear Gloves
|
Eye Protection
|
Hearing Protection
|
Dust Mask
|
