Menu
Your Cart

DOUBLE SIDED WOOL BUFF 7' 180MM WITH 5/8 THREAD

DOUBLE SIDED WOOL BUFF 7' 180MM WITH 5/8 THREAD
DOUBLE SIDED WOOL BUFF 7' 180MM WITH 5/8 THREAD
Based on 0 reviews. - Write a review
Price
R 626.29
Ex VAT: R 544.60
  • Stock: In Stock
  • Cat No: MM DS7-2
  • Weight: 0.08kg
  • Dimensions: 275.00mm x 220.00mm x 20.00mm
  • SKU: MM DS7-2
  • Barcode: 6009515827816

Available Options

Ask Question Ask Question
Stockists
Double sided wool buff

Diameter: Ø180mm
Thread/Hook & Loop: 5/8 UNC

 Application:

The double sided wool buff should be used with an automotive polisher. Different compounds, polishes and waxes can be applied to both sides of the buff and then flipped around when needed. This saves time without the need of changing to another buff.

It is necessary to polish a vehicle body panel when:

  • The panel has been newly painted with a clear-coat.
  • Shallow scratch marks need to be removed.
  • The panel has suffered from oxidation.
  • Swirl marks and hologram defects need to be removed.

TIP:
The buff is washable after use if the compound is soluble.

Double sided wool buff range:

ORDER NO. DIAMETER THREAD
MM DS7 Ø180mm M14
MM DS7-2 ø180mm 5/8 UNC
MM DS9 ø230mm M14
MM DS9-2 ø230mm 5/8 UNC

Adaptors to convert or lenghten the polisher's thread:

ORDER NO./td> MALE THREAD FEMALE THREAD
SPC00055 5/8 UNC 5/8 UNC
SPC00053 5/8 UNC M14
SPC00054 M14 5/8 UNC
SPC00052 M14 M14
Double sided wool buff

Steps to take when polishing a panel:

1. Preparing the panel:

  • Sometimes a panel has fine over-spray left from spraying the clear-coat. This needs to be removed by lightly sanding with a fine abrasive paper. All over-spray need to be sanded out up to P1500 grit.
  • The panel should be washed when all spray-finishing defects have been removed. Any dirt particles could cause scratch marks when polishing.
  • Tight curves and ends of the panel should be masked-off to prevent the effects caused by point pressure. The polisher should always be used on flat surfaces.

2. Applying the polishing compound:

  • A five rand coin amount of polishing compound should be applied to the sponge. Switch the polisher to it's lowest speed setting.
  • Switch on the polisher and gradually spread the polishing compound over the panel.
  • Keep moving the polisher on the panel to have as little amount of pressure and friction.
  • The polishing compound will remove the scratch marks caused by the P1500 sand paper and it will bring out an impressive gloss finish.
  • Remove the masking from the panels and apply the polishing compound to a microfiber cloth. Hand polish (by moving your hand in a small circular motion) the tight curves and ends in the panels until the same finish is achieved as from the polisher.

3. Wash the panel when finished:

  • Wash the panel after polishing to remove any residue from the polishing compound.
consider safety for your health and the people around you

General safety suggestions:

It is advisable to always have the following items nearby and in a good condition

  • Eye protection – clean and scratch free
  • Hearing protection – quality earmuffs
  • Dust masks – discard old and dirty masks
  • Gloves – for easy handling of material and hand protection
Wear Gloves Eye Protection Hearing Protection Dust Mask
Wear Gloves
Eye Protection
Hearing Protection
Dust Mask
Tags: Double sided wool buff , Polishing , Brand TORK CRAFT
5' 125MM POLISHING BONNET WOOL
Cat No: MM5
5' 125MM POLISHING BONNET WOOL
Tie on polishing wool buff Diameter: &O/;125mm Use backing pad: TCBP125C / PG338  Application: The polishing wool buff should be used ....
R 154.73
Ex VAT:R 134.55
Stockists
POLISHING BONNET WOOL HOOK AND LOOP 125MM 5'
Cat No: SPC00123
POLISHING BONNET WOOL HOOK AND LOOP 125MM 5'
hook & loop polishing wool buff Diameter: &O/;125mm Use backing pad: SPC00120  Application: The polishing wool buff should be used wit....
R 152.15
Ex VAT:R 132.30
Stockists
9' 230MM POLISHING BONNET WOOL
Cat No: MM9
9' 230MM POLISHING BONNET WOOL
Tie on polishing wool buff Diameter: &O/;230mm  Application: The polishing wool buff should be used with an automotive polisher. Diffe....
R 279.39
Ex VAT:R 242.95
Stockists
DOUBLE SIDED WOOL BUFF 9' 230MM WITH 5/8 THREAD
Cat No: MM DS9-2
DOUBLE SIDED WOOL BUFF 9' 230MM WITH 5/8 THREAD
Double sided wool buff Diameter: &O/;230mm Thread/Hook & Loop: 5/8 UNC  Application: The double sided wool buff should be used with an ....
R 697.88
Ex VAT:R 606.85
Stockists
9' 230MM POLISHING BONNET WOOL 100% SHEEPSKIN
Cat No: MM9-2
9' 230MM POLISHING BONNET WOOL 100% SHEEPSKIN
Tie on polishing wool buff Diameter: &O/;230mm  Application: The polishing wool buff should be used with an automotive polisher. Diffe....
R 310.33
Ex VAT:R 269.85
Stockists
4' 100MM POLISHING BONNET WOOL
Cat No: MM4
4' 100MM POLISHING BONNET WOOL
Tie on polishing wool buff Diameter: &O/;100mm  Application: The polishing wool buff should be used with an automotive polisher. Diffe....
R 121.73
Ex VAT:R 105.85
Stockists
8' 200MM POLISHING BONNET WOOL
Cat No: MM8
8' 200MM POLISHING BONNET WOOL
Tie on polishing wool buff Diameter: &O/;200mm  Application: The polishing wool buff should be used with an automotive polisher. Diffe....
R 225.80
Ex VAT:R 196.35
Stockists
DOUBLE SIDED WOOL BUFF 9' 230MM WITH M14 THREAD
Cat No: MM DS9
DOUBLE SIDED WOOL BUFF 9' 230MM WITH M14 THREAD
Double sided wool buff Diameter: &O/;230mm Thread/Hook & Loop: M14  Application: The double sided wool buff should be used with an auto....
R 697.88
Ex VAT:R 606.85
Stockists
DOUBLE SIDED WOOL BUFF 7' 180MM WITH M14 THREAD
Cat No: MM DS7
DOUBLE SIDED WOOL BUFF 7' 180MM WITH M14 THREAD
Double sided wool buff Diameter: &O/;180mm Thread/Hook & Loop: M14  Application: The double sided wool buff should be used with an auto....
R 609.96
Ex VAT:R 530.40
Stockists
10' 250MM POLISHING BONNET WOOL
In Stock Soon
Cat No: MM10
10' 250MM POLISHING BONNET WOOL
Tie on polishing wool buff Diameter: &O/;250mm  Application: The polishing wool buff should be used with an automotive polisher. Diffe....
R 329.02
Ex VAT:R 286.10
Stockists